DE/ADM42S / UIM42S RS485 Stepper Motor Controller
Produktlink
[edit]Produkt auf adampower.de anzeigen
Beschreibung
[edit]The ADM42S (UIM42S) is an RS485 serial Schrittmotor controller for NEMA17 motors. Dimensions: 42.3mm x 42.3mm x 21mm. Integrates with 42mm or 39mm Schrittmotors.
Uses standard RS485 protocol with built-in motion control instructions, supporting up to 32 axes simultaneously. DC input 12-32VDC with 24VDC recommended. Continuous current 1.58A, peak 2.2A.
Six DIP switches configure device ID (0-15) and baud rate (9600-57600). Inputs include two limit switches, start/stop signal, and RS485 lines. Protection includes over-voltage, under-voltage, and over-current.
Spezifikationen
[edit]| Parameter | Min | Typical | Max | Unit | |||||
|---|---|---|---|---|---|---|---|---|---|
| Supply Voltage (DC) | 12 | 24 | 32 | V | |||||
| Continuous Output Current | 鈥? | 鈥? | 1.58 | A | |||||
| Peak Output Current | 鈥? | 鈥? | 2.2 | A | |||||
| Communication Baud Rate | 9600 | 鈥? | 57600 | bps | |||||
| Number of Axes | 1 | 鈥? | 32 | - | Dimensions | 鈥? | 42.3x42.3x21 | 鈥? | mm |
Merkmale
[edit]- Miniature: 42.3mm x 42.3mm x 21mm
- RS485 communication protocol
- Built-in motion control instruction set
- Multi-axis control up to 32 axes
- DC 12-32VDC, recommended 24VDC
- 2.2A peak, 1.58A continuous
- DIP switch configurable ID and baud rate
- 2 limit switch inputs
- RS232/RS485 serial debugging
- Überspannung, under-voltage, over-current protection
- NEMA17 integrierter Motor mounting
en:ADM42S___UIM42S_RS485_Stepper_Motor_Controller fr:ADM42S___UIM42S_RS485_Stepper_Motor_Controller es:ADM42S___UIM42S_RS485_Stepper_Motor_Controller pl:ADM42S___UIM42S_RS485_Stepper_Motor_Controller